Netgear G Router Setup Page

Netgear G Router Setup Page: A Comprehensive Guide

configuring the WAN Setup Options

The WAN Setup options let you configure a DMZ (demilitarized zone) server, change the Maximum Transmit Unit (MTU) size, and enable the wireless router to respond to a ping on the WAN (Internet) port. To access the WAN Setup options, log in to the Netgear G router setup page using the default IP address, which is usually 192.168.1.1 or 192.168.0.1.

Step-by-Step Instructions to Setup Your Netgear G Router

1. First, connect your computer to the Netgear G router using an Ethernet cable.
2. Open a web browser and type the default IP address of the router in the address bar. For Netgear G routers, the default IP address is usually 192.168.1.1 or 192.168.0.1.
3. When prompted, enter the default admin username and password. The default username is usually "admin" and the password is usually "password." However, please note that the default password may have been changed during the packaging process.
4. Once you log in, click on the "Setup" tab and then select "WAN Settings." From there, you can configure the DMZ server, change the MTU size, and enable the wireless router to respond to a ping on the WAN port.
5. Save the changes and reboot the router for the changes to take effect.